Roline Cable/DSL Router Guía de usuario descargar pdf (Pagina 158)

030-300536 Rev. A 158 August 2007

User GuideVersaLink Wireless Gatewa

(

Model 7500

)

IP Address Distribution

IP Address

Distribution

Factory Default = Private LAN

This setting allows VersaLink to automatically assign IP addresses to local devices

connected to the LAN.

Off = DHCP Server is disabled

Private LAN = DHCP addresses will be issued from the Private LAN DHCP server.

Start IP Address Factory Default = 192.168.1.15

This field displays the first IP address that the DHCP server will provide. The DHCP

Start Address must be within the IP address and lower than the DHCP End Address.

You can use any number from 0 to 254 in this address.

End IP Address Factory Default = 192.168.1.47

This field displays the last IP address that the DHCP server will provide. The DHCP

End Address must be within the IP address and higher than the DHCP Start Address.

You can use any number from 0 to 254 in this address.

DHCP Lease Time Factory Default = 01:00:00:00

Displays the amount of time the provided addresses will be valid, after which the DHCP

client will usually resubmit a request.

Note: This value must be greater than 10 seconds. Seconds must be between 0 and 59,

minutes must be between 0 and 59, and hours must be between 0 and 23.

By default Private LAN is already enabled. To disable the Private LAN DHCP server, select Off from the IP

Address Distribution drop-down menu.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 185 186

Sin comentarios

Roline Cable/DSL Router Guía de usuario Pagina 158